70766 Fuel Filter, Regulator and Single Line Kit for Gen 1-2 Coyote in Roadster (Direct Mount)

Fuel Filter/Regulator and Fuel Line Kit for use with Gen-1-2 Coyote Engine. This kit simplifies and improves your fuel supply setup by using the fixed-pressure combo filter/regulator and connecting it direct to the fuel pump return with a single 316 stainless swage fitting. The nice thing about this setup is it is a return-style system but appears return-less from the engine compartment since the only fuel line that runs forward is the 06AN braided stainless supply hose.  the regulator is set to 58 psi and is not adjustable. This kit is for use with normally aspirated (NA) Coyote applications when the flywheel HP is 470 or below with a nominal 190lph fuel pump.  If your Coyote will be making more than 470 HP the you will need at least a 255lph fuel pump, the 70777 Remote Mount Filter/Regulator and the 70750 High Flow Fuel Return. Includes Filter/Regulator with 06AN outlet adapter, swage fittings for pump and Coyote fuel rail, 11′ of Aeroquip Teflon lined 06AN braided stainless hose, hose end fittings and rubber lined stainless mounting loops with stainless hardware. For use with, and requires, Breeze 70734 190 LPH In-Tank EFI Fuel Pump with 3/8″ Outlet, and 70748 Quick Connect Hose assembly to complete your fuel supply system. Note: Not for use with Gen 3 Coyote due to higher fuel pressure required.